Airthings View Plus and View RadonWhile I run an air purifier in my bedroom to reduce allergens, I can’t say I’ve been really concerned about my home’s overall air quality. Part of me thought since I switched from a gas furnace to electric heat I would never have an issue with carbon monoxide or a lot of dust in the air, but my calm attitude toward my air quality flew out the window after I plugged in the Airthings View Plus monitor and the Airthings View Radon monitor. I had no idea what was in my home’s air, and now that I know, I want to keep monitoring it long-term.

Features of Airthings View Plus and View Radon monitors

Airthings View Plus lightWith Airthings View Plus and View Radon, you can monitor your home’s air quality via an easy-to-use display and the Airthings app. Both monitors connect to your home’s Wi-Fi network so you can check your air quality or radon levels from anywhere.

  • View Plus has 7 sensors and monitors for radon, particulate matter (PM2.5), CO2, and more
  • View Radon has 3 sensors and monitors for radon, humidity, and temperature
  • Airthings app shows a history of your home’s air quality and uses graphs and colour-coded indicators to show what the air quality is like in your home
  • The customizable display uses batteries and can be plugged into power
  • The wave function lets you wave your hand in front of the display and a light will show you whether your air quality is good, fair, or poor
  • Integrates with your smart home to give you voice control for your air quality monitor

What is radon and why should I monitor it?

Radon is an odourless radioactive gas that’s present in all homes. It’s colourless and occurs naturally in small amounts. It becomes a problem if radon is trapped inside after entering a building through cracks in your foundation or other holes.

If it does become trapped and you routinely breathe it in, radon can cause lung cancer. While you can look on a radon map to see if radon levels are high in your area, the only way to know if you have radon in your home’s air is by testing it. That’s where Airthings View Plus and View Radon come in.

Setting up Airthings View Plus and View Radon air quality sensors

airthings view plus reviewAirthings View Plus and View Radon air quality sensors are small displays that use batteries and have a cord to connect to power. There is no hard wiring or complicated setup required. You can put the batteries in the display, plug it into power, and begin monitoring your home’s air quality.

The Airthings display will let you know what your home’s air quality or radon levels are at a glance, but you can pair the Airthings monitor with the Airthings app and customize your set up. You’ll download the app, tap to add an air quality monitor, and the app will find your device. They pair very easily and I connected both to my home network in just a few minutes. Once the monitors are connected to your home’s Wi-Fi network you can monitor your home’s air quality or radon levels from anywhere.

Testing Airthings air quality sensors

You can view your air quality and radon levels right on the display, so you don’t have to use the app unless you want to see what your air quality is like when you’re away or if you want to see detailed graphs and other data.

Airthings shows you your home’s air quality at a glance

air quality airthings Airthings view radon sensor

I put the Airthings View Plus in my living room and the View Radon in my bedroom. With 7 sensors the View Plus can test for the following.

  • Radon: Odourless gas present in all homes
  • PM2.5: Particulate matter like dust, pollen, and spores that irritates lungs
  • CO2: Carbon dioxide in high quantities can indicate amount of recycled air (and circulating viruses in the air), cause drowsiness, and impact productivity
  • Humidity: High humidity can cause mold or spread viruses
  • VOC: Volatile Organic Compounds are chemicals from household products that can impact health over the long term
  • Air pressure: Affects radon levels and can cause body aches
  • Temperature: A look at your home’s temperature

The first thing I noticed when I started testing out the View Plus is that the air quality in my home isn’t that great. I’ve been in the middle of doing some long overdue maintenance on the floor and some walls, and I’ve been trying to clean up after to keep the dust low. I was also painting, because removing sections of the wall required a new coat of paint.

The Airthings View Plus picked up on the poor air quality right away, and it sent me a few alerts to my phone that the levels of PM 2.5 were too high. They are at 39 right now, but at one point they hit 186. That must have been when I was sanding the walls, sending dust into the air. After I painted, the VOC levels increased too. They are currently hovering at 149, but they hit 875 when I was painting. I had no clue the paint I was using had such high VOC.

Thankfully, the monitors have only shown very low levels of radon. The Airthings View Radon was in my bedroom, and I was pretty surprised to see that the radon level in my bedroom was higher than in my living room. It has hovered around 9 while the living room has stayed around 4. I’m happy the level is still low enough that there are no issues I need to fix.

Wave to light up Airthings air quality monitors

radon gas thresholdsThe Airthings View Plus and Airthings View Radon have very simple displays. You can’t tap them to scroll through all of your readings, but you can wave your hand in front of the display and it will flash a coloured light to indicate your current air quality. I waved my hand and a yellow light flashed to indicate that the air quality is fair. If I had good air quality the light would be green, and poor air quality would flash a red light.

The display will flash the light, scroll through your 3 main sensors, and then reset back to your main screen. The View Plus display is customizable and you can choose which 3 sensors you’d like to display on the screen. If you want to see PM 2.5, radon, and the temperature you can set it to show them on the display. All of your other data will still be available in the app.

I really appreciate having a visual indicator of my air quality right on the display. It helps me decide if I want to pull out my phone and take a look at what’s going on or see if there is a need to be concerned. The app also uses colour codes to show if your air quality is good, fair, or poor. The circle around the readout will be the colour it corresponds to, and that saves you time looking up whether 9 is a bad readout for radon.

Connects to your smart home assistant

You can connect your Airthings View Plus and Airthings View Radon to your Google Assistant or Alexa so you can use voice control. You can ask your assistant to let you know what the air quality is like in your living room or bedroom and they will tell you without you needing to open the app or walk past the display.

Should you choose Airthings View Plus and Airthings View Radon sensors?

airthings view radon air qualityI had no idea I had such poor air quality in my home, and I’d love to see what Airthings thinks after the sensors are fully calibrated. It takes 30 days of monitoring until they are, so I’ll have to wait and see what the next few days bring.

Both Airthings View Plus and Airthings View Radon are easy to use and make it very simple to see what your air quality is like. I’m really impressed with the readouts on the display, and I love being able to pull out my phone and see detailed information. Now that I’m aware I’ll make changes to improve the air quality and I’ll be moving my air purifier into the living room to see if that helps. I’m also going to choose low-VOC paint from now on because that sensor spiked when I was painting.

Both Airthings monitors really do provide peace of mind. Now that I know I could have radon, I can’t imagine not monitoring for it. The radon map showed higher-than-average levels of radon in my area, so it’s better to keep an eye on it in case something changes.

You can find Airthings View Plus and Airthings View Radon monitors for your home online at Best Buy.

Shelly Wutke
Editor TV & Home Theatre
I'm a Vancouver freelancer and tech enthusiast. When I'm not writing you'll find me on my farm with my alpacas, chickens, and honeybees. Visit my website Survivemag

248 COMMENTS

  1. I would put one in our basement bedroom (where our radon mitigation system is) and one in the house extension that is on a slab.

  2. I would put the Radon unit in the hallway by the living room and the air quality monitor at the other end of the long hallway by the bedrooms.

  3. I would put one by the living room on the main level and one in the basement as well as our basement is finished and we spend a lot of time down there watching TV.

  4. I would put the Airthings Monitor by the themorstat on the main floor and the Radon Monitor in the basement by the sump pump in the utility room.

  5. I would put the Airthings View Plus monitor in in my hallway near the entrance and the Airthings View Radon monitor in my bedroom.

  6. I would put the Radon Monitor in the basement family room and Airthings Air Monitor in my living room.

  7. I would put the Airthings View Smart Radon Monitor in the basement and the n Airthings View Plus Air
    Quality Monitor on the main level family room

  8. I would put the Airthings View Smart Radon Monitor in the basement and the Airthings View Plus Air
    Quality Monitor upstairs where all the bedrooms are

  9. I would put the Airthings View Smart Radon Monitor in the basement and the Airthings View Plus Air
    Quality Monitor upstairs where all the bedrooms are

  10. I would put the Airthings View Smart Radon Monitor in the basement and the n Airthings View Plus Air
    Quality Monitor on the main level family room

  11. If I had these I’d put one in the living room and put the other in a bedroom. I’d probably move it from bedroom to bedroom at the start to get a baseline and then leave it in which ever room had the highest measurements to make sure things don’t get worse over time.

Comments are closed.