Thinkware Q1000 unbox

The Thinkware Q1000 dash cam might be the highest end one I’ve reviewed yet. Of all the brands I’ve reviewed, Thinkware has shown the most variety in offerings, ranging from cloud-based options to localized options, and options with and without Wi-Fi and mobile app support. Diversity in options is always good for people with different tastes and budgets.

The Thinkware Q1000 is a dual channel dash cam with flexible recording options, updated tech, and a wealth of other features that, on paper, make it look like a standout in a sea of dash cams. This is where this review begins.

Unboxing your Thinkware Q1000 dash cam

There are a lot of parts included with your new dash cam, including the front and rear cameras that default record at 30 FPS at 1440p. There’s no separate GPS peripheral this time since it’s onboard the front camera. The front camera can also record at 1080p 60 FPS. However, this will require a full re-format of your card and you’ll lose any existing recordings. You also get a front mount with an extra adhesive and heat shield film for it, a 12V car charger and hard wiring kit for choice of power, wire clips, and a 32GB MicroSD card with adapter. The card is pre-formatted for immediate use as well.

There is a port for a radar add-on, which is optional and not included in this package. The radar add-on helps wake up your camera to capture footage before and after a collision when it is in Energy Saving Mode.

Hooking up your Thinkware Q1000

As can be expected, Thinkware provides two useful methods to connect your dash cam. The soft install sees you plug in through the 12V car charger. Depending on your vehicle, this could be a continuous power source (though I assume a fair drain on your battery this way if it is) or not. Case in point, my SUV considers this port to be continuous power, while my sedan does not. Then there is the hardwiring kit, which has you connect to continuous power sources through your vehicle’s fuse box. That continuous power source draws a small amount but gives you access to all of the hard wiring parking surveillance features. Depending on what’s available in your vehicle, you might also need to buy extra fuse adapters to make it work.

There is more than enough, and trust me when I say MORE than enough, slack from the rear camera out to the front. After hiding wiring from the back to the front, I think I was still left with about 15 feet of extra slack.

Hiding all of your dash cam’s wiring is an interesting and fun process.

Hard wiring was a different issue. I was interested in hard wiring this dash cam to my sedan and then taking advantage of the parking surveillance features. Unfortunately, I had some trouble finding somebody locally to do this, and when we finally got to where we decided to do it ourselves, we ran into a couple of technical difficulties. Unfortunately, I won’t be able to show off hard wiring features during the initial review, but will try and get a video out in the future when we’re able to connect the hard wire kit. If hard wiring is absolutely not an option for you, or you cannot make it work within the confines of your vehicle (i.e. the hardwiring kits aren’t long enough or some other sort of technical difficulty), Thinkware does also sell standalone dash cam batteries for their systems. These again do require hard wiring (since they need a charging source) but are another possibility.

ThinkwareQ1000Alignment
Aligning your dash cam view using the guide in the app.

Should you go with soft wiring the dash cam, it’s a basic plug and play process. Just remember to make sure that everything is connected properly and clicked into place. You’ll receive some notifications from your dash cam if it isn’t hooked up properly. If it is, you’ll just be encouraged to have a safe drive!

Connecting to your Thinkware Q1000 dash cam

When you go to your App store, you’re going to see two Thinkware apps—ThinkwareCloud and DashCamLink. It’s DashCamLink that you want to download to connect to this camera. I’ve reviewed so many Thinkware dash cams at this point that I had both on my phone, so I decided to try and connect to the wrong app on purpose to see what happens. The ThinkwareCloud app DOES recognize your Q1000, but will tell you that it isn’t supported and rightly tells you to download the proper app.

Connecting to the camera is probably a 30ish second process each time. However, the first time you properly connect to the camera, it should pick up the Q1000 each time as long as you see the valid Wi-Fi signal and open the app. Once you’re connected to the camera though, the transfer speeds to your phone are really fast.

From here, you can view all of your footage to date as well as changing up your settings. If you prefer, you can also use the Thinkware PC Viewer program which is bundled onto the memory card, or just plug the MicroSD card into your PC and watch your recordings straight from there.

Operating and fine-tuning your Thinkware Q1000 dash cam

A shot of Thinkware Q1000’s rear camera during the day

By default, both Thinkware Q1000 cameras record at a 156 degree field of vision at 30 FPS. They are also onboarded with Sony’s STARVIS image technology. As mentioned above, you can have your front camera record at 60 FPS if need be as well, though it’ll be downscaled to 1080p. While the rear camera looks like your standard Thinkware rear camera on the outside, it’s a bit more powerful on the inside. The cameras come equipped with Night Vision 3.0 as well, providing clearer footage at night than past Thinkware camera equipped with previous versions.

Fine tuning is done completely through the app, including help with mounting your camera in the right spot. You can use the app as a guide to install both cameras in the right place. There’s also a handy calibration overlay that the app provides to ensure that you have your front camera pointing out correctly. The front camera can be manually adjusted to fit within those parameters. You can then use a live guide to properly mount your rear camera as well.

There are a handful of options available in the app, including flipping the rear camera view, changing recording type, tinkering with the speed/GPS and more. They’re all fairly stock standard options you would expect from a camera. I couldn’t find any continuous loop modification options, which means that the dash cam loops recordings for you in one minute slices and will record over footage once the camera is full.

One really helpful feature, however, is that when calibrated, you get this great suite of driver assistance features. Thinkware cameras I’ve reviewed for the past few years have always had red light camera detection, however, there’s a lot more here. I also received notifications for speed traps, changes in speed limit, and full Advanced Driver Assistance features, like collision detection and 360 degree departure and collision warnings. Since there is no LCD screen on this model, you’ll have to get used to the audible notifications of ADAS here, but it’s easy enough to learn them. Using the Thinkware Connected app, you’ll also get some extra features like the ability to send emergency alerts to a deemed contact, impact notifications, and more. Again, while the features of Thinkware Connected aren’t mandatory (and require you to register the camera and an account with Thinkware), they’re just great extra features thrown in to help the case of going with one of their dash cams.

Thoughts on using the Thinkware Q1000 dash cam

Thinkware Q1000 front camera during the day

When I look at dash cams, I always think about a couple of things for the average consumer aside from the features. The ease of install, the small footprint on the windshield, and all of the additional features make this a winner for me.

In addition to the expected recording features, I really like the fact that dash cams now come with helpful supplementary features like ADAS and its collision/lane departure warnings. After you initialize the ADAS through the app, you’ll have to fine tune it a bit so that it is sensitive, but not too much. The notifications sound a bit like the seatbelt fastening noise on an airplane, so you’ll want to play around until you get just the right amount and it isn’t overdone.

Is the Thinkware Q1000 worth the price?

Thinkware Q1000’s rear camera at night

The Thinkware Q1000 is a higher end dash cam with a higher end price tag, but the features make it worth the price. I think anybody in the market for a dash cam should really think about whether all of these features are those you’re interested in and then commit. This is a definite step up from the X800 (both in features and all around recording) that I reviewed a couple months ago. This is the type of camera I’d recommend straight off to anybody looking for one, though the absence of the LCD screen might be a hangup for some (like my mom, for example) so I’d say weigh out everything you need, and everything that’s a nice to have and make the choice. Either way, I quite like this one and feel like we’ll be using it for a long time.

The Thinkware Q1000 dash cam (and the optional radar hookup and colour polarizing filters) is now available at Best Buy and online at bestbuy.ca.

Matt Paligaru
Matt Paligaru
Emerging Technology
A technology nut at heart, I'm always interested in what makes our lives easier and helps us tick day to day. Whether Home Automation, toys, games (board and video) or everything in between, I'm always looking around the corner to see what drives us in today's day and age.
Skype Twitter Youtube

RELATED ARTICLESMORE FROM AUTHOR

391 COMMENTS

  1. The resolution is fantastic, the cloud storage is even better! its perfect for emergencies and sometimes you forget to save your footage, so cloud storage is perfect

  3. I love the fact that the Thinkware Q1000 can be installed with a soft wire job or a hard wire job. I love the cloud ability as well as the fact that there is a rear camera…it is now a necessity and something I do not have. I also love that the item has an APP.

  4. It would help me catch any road incidents that happen. There are a lot of bad drivers out there and people will lie if they believe they can get away with it.
    Having this dash cam would capture exactly what happened if an issue arising.

  8. A dash cam like this would be helpful driving in unfamiliar areas to remind me of the speed limit as I often miss the signs.

  12. This’ll dash cam would benefit my life if I installed one in my car because the red light indicator would be such a major boon! My vision is okay, but it’s always good to have reassurance when driving at night.

  17. It would benefit my life because it would catch accidents that happen around me and to me and this way we would all see what exactly happened! 🙂

  18. These dashcams do a lot more now! This one can notify you of radar traps and speed changes. This would certainly make my driving safer.

  20. I’ve had a of accidents where the other driver was at fault but they have lied abot the collision to avoid responsibilty. In all but one case I was alert enough at the time to have a witness to support my story but a dashcam would have been much more reliable if there was no witness.

  21. I think this would benefit my driving life as it also has lane department assist, which is great after driving for long periods of time.

  22. I like that it has front and rear cameras with great resolution – it would be a relief to know you would have footage if anything went wrong (accident, car damage, etc.)

  23. I think I would feel more secure if I knew that in an accident I could see who was at fault and be able to prove it. Night vision is good.

  24. As I posted the “long version” in the main contest page……….for me, it is simply that this would be a “digital witness” for any events……..whether it is for myself, or if I come across another event/accident where I could offer assistance. It would make an incredible difference in every situation.

  26. A dash camera would benefit me by making sure I’m able to have a complete record of any accident involving my car, whether im in it or not!

  29. In the event of an accident, this product would alert and give me peace of mind when I or one of my kids was driving.

  31. A dash cam would give me some peace of mind if I was involved in an accident because it could potentially provide support for an insurance claim.

  35. This dash cam would benefit my life if you installed in car as it has good resolution and night vision to keep track and see everything that is going on around the vehicle

  36. This would replace an old dashcam I have right now. It would add major functionality in terms of high-resolution, wifi, night vision, and a rear camera. All those things would make me feel safer, in case of any accident.

  40. It would help me keep track of what’s going on around me in just about every direction and angle as well as pickup criminal activity.

  41. I would use the dash cam soft wired to start and to help record anomalies and insurance issues. I like the reliability of Sony’s STARVIS image technology they’ve had years to refine image/video processing.

  42. It would help me keep track of what’s going on around me in just about every direction and angle as well as pickup criminal activity.

  43. If there was an accident and it came down to my word vs the other driver’s word, a dash cam video would show what exactly happened.

  44. This dash cam would give me peace of mind to know I would have a video record of anything that may happen while driving or parked.

  46. This dashcam would be perfect for emergencies! After an accident, emotions run high and memories may be faulty. But with the Thinkware Q1000 dash cam, I would have a perfect recording of the event. This would reassure me as well as my insurance company haha!

  50. wow! the camera has amazing resolution from the review video. this would greatly benefit my life as it would increase my safety when driving.

Newer Comments »

Comments are closed.